-
M12 140mm Through Bolt Pack 10 A versatile, torque controlled through fixing for use in a wide range of anchoring applications into concrete. NOTE: If no torque wrench is available, tighten the nut 3 to 4 full turns from finger tight. • Chamfered head design to prevent damage to thread during installation • Zinc plated and passivated (3-5 microns) • Manufactured from cold formed carbon steel (grade 5.8) • Special expansion clip for rapid installation -
AdBlue 10 Litre This is a special formulated high diesel exhaust fluid (DEF) for use in selective catalytic reduction (SCR) systems Adblue contains a 32.5% solution of urea in deionised water which is injected into the exhaust stream to break down harmful nitrogen oxides (NOx) into harmless nitrogen and water vapour. 5% reduction in fuel costs and lower servicing costs. -
Our recessed Metal and Plastic block paving, driveway manhole / drain cover has been specially designed for use in conjunction with block paving to give an almost hidden appearance. Suitable for block paving and slabs. Internal use and areas of slow moving traffic up to ten tonne gross vehicle weight. Sizes 450mm x 450mm x 40mm 450mm x 450mm x 80mm 600mm x 450mm x 40mm 600mm x 450mm x 80mm 600mm x 600mm x 80mm -
Lintel Prestressed Concrete Our concrete lintels are a type of structural support used to carry the load above openings in walls. They are concrete that has been prestressed, which means it's been placed under tension before it has cured. This gives the lintel strength and helps to prevent it from cracking under load. Size: 100 x 65 x 1200mm 100 x 65 x 1800mm -
Sale!
Universal Ventilated 6m Dry Ridge Kit – Black
Our universal ventilated dry ridge system is a high-quality and cost-effective dry fix system, providing ridge level ventilation for any pitched roof. The dry ridge set provides everything required for a 6m length of ridge or hip. 1 x Box contains: 6m dry ridge roll, 13 dry ridge union strips + clips, 10 ridge brackets, 13 fixing screws & 13 clamping plates -
StormCrate55 A modular cellular crate used in storm water retention, attenuation and infiltration applications. Our crates are designed to be easily stacked together for a below ground storm water holding tank or to allow the infiltration of water from storms into the ground around them. Void created by the crates can fill up with water during heavy rainfall. The collected water then drains away slowly into the drain system when used for attenuation, or, soaks away slowly into ground water table when the crate is used for infiltration. -
Flat Wall Expansion Ties Debonding sleeve lets masonry expand or contract for better usage, Maximum durability and stability Our Flat Wall Expansion Ties are Stainless steel strip tie design, used with a Debonding Sleeve in a movement joint in brickwork or blockwork. The movement ties restrain masonry against lateral loads whilst allowing brick walls and masonry expand or contract. Each stainless steel tie body has a plain end and a perforated end and a de-bonding sleeve that fits the plain end.